以下是打开的文本文件，启用Wi-Fi的说明以粗体显示。

#
# This file configures the Piaware sdcard image
# configuration. Whenever the system boots, this
# file is read and its contents are used to
# configure the system.
#
# Lines beginning with a '#' are comment lines
# and are ignored. Blank lines are also ignored.
# All other lines specify configuration settings.
#

#
# WIRED NETWORK CONFIGURATION
#
# Should piaware use the wired ethernet port
# for network access?
wired-network yes

# Wired network configuration:
# Most networks will use DHCP
wired-type dhcp

# Alternatively, a static address configuration
# can be provided; set "wired-type" to static to use this.
wired-address 192.168.1.10
wired-netmask 255.255.255.0
wired-broadcast 192.168.1.255
wired-gateway 192.168.1.254
wired-nameservers 8.8.8.8 8.8.4.4

#
# WIRELESS NETWORK CONFIGURATION
#

# Should piaware use a wifi adaptor
# for network access? You will need to attach
# a supported USB wifi adaptor for this to work.

# change this to "yes" to enable wifi
wireless-network yes

# Wifi SSID and password.
# This should be changed to match your wireless
# network SSID and, for networks that require
# a passphrase, the passphrase.
wireless-ssid MyWifiNetwork <-----replace MyWifiNetwork with the name of your WiFi (aka the SSID of your local network)
wireless-password s3cr3t <-----replace s3cr3t with the password to your WiFi

# Wifi network configuration:
# Most networks will use DHCP
wireless-type dhcp

# Alternatively, a static address configuration
# can be provided; set "wireless-type" to static to use this.
wireless-address 192.168.1.10
wireless-netmask 255.255.255.0
wireless-broadcast 192.168.1.255
wireless-gateway 192.168.1.254
wireless-nameservers 8.8.8.8 8.8.4.4

1. 将安装了PiAware 的SD卡插入您的树莓派。

2. 可选：装好Raspberry Pi的外壳。
3. 将USB SDR ADS-B接收器插入Raspberry Pi。

4. 将天线电缆紧紧插入USB SDR ADS-B硬件锁。

5. 插上以太网（互联网）网线。（如果使用WiFi，则跳过此步骤）
6. 插上Raspberry Pi的电源。

7. 您可以观察树莓派上一个常亮的红色LED灯和一个闪烁的绿色LED灯，同时观察网口的黄色和绿色LED灯（树莓派B在电路板上）。

您可能需要等待 PiAware 启动大约四或五分钟，然后可以将您的 PiAware 设备关联您的 FlightAware 帐户来获取免费的企业级账号。

一旦您运行了设备，请：

在路由器管理界面查看IP地址，并在浏览器中转到同一个网络中分配的IP地址。如果该设备还未关联，则将显示一个链接用于关联该PiAware设备。

或者

在 FlightAware.com上绑定您的PiAware客户端。

如果5分钟后您的设备还未显示为已绑定，请重新启动设备，如果这仍然不起作用，请重新确认Wi-Fi设置（如果使用Wi-Fi）正确无误。最后，您还可以通过ADSBsupport@FlightAware.com与我们联系。请检查您的统计信息页面（见以下链接）以确认其是否绑定。

1. 天线
2. 为较大容量的SD卡扩展文件系统
3. Linux密码设置
4. 通过命令行访问PiAware
5. 978 UAT Setup Instructions